*NITTO* high neck ahead stem (dull/31.8)

In Store : Oct. 2nd (Fri) 12:00pm
Online : Oct. 8th (Thu) 7:00pm

Japan’s renowned bicycle component manufacturer, NITTO.

The Nitto High Neck Threadless Stem, made exclusively for Blue Lug, is a chromoly steel threadless stem based on a classic Nitto design.

Its roots can be traced back to the UI-7, a model originally released through Nitto x Fairweather line more than a decade ago.

Based on this discontinued model, which has long been requested for a reissue, we’ve revisited the specifications to better suit modern bikes and handlebars, creating what could be considered a contemporary version of the original.

Its defining feature is, as the name suggests, its 72 mm stack height and high-neck design. The stem itself provides roughly the same additional height as adding around 30 mm of spacers to a conventional threadless stem.

When you want to raise the handlebar on a frame with a relatively short head tube, this stem lets you achieve a clean-looking cockpit without stacking multiple column spacers.

The stem angle remains -8°, just like the original UI-7.

The 31.8 mm handlebar clamp version is available in 70, 80, 90, 100mm lengths, designed for use with drop bars instead.

The handlebar clamp has been upgraded from the original two-bolt design to a four-bolt clamp. This provides increased clamping force, particularly when paired with wide handlebars or bars with a substantial backsweep.

On the steerer side, it retains the original's simple design, secured by a single bolt from the upper rear.

By keeping the bolt positioned exclusively on the upper side, the stem maintains a clean appearance even when additional spacers are installed underneath.

IMPORTANT: At least 70 mm of steerer tube must remain for installation. This stem cannot be used to extend the length of a fork steerer.

Installation: Adjust the spacers so that the top of the stem sits 2 mm above the end of the fork steerer tube.

MADE IN JAPAN